-40%
1/8HP Lathe Milling Bandsaw Coolant Pump, 3 Phase 575V, shaft 100mm(4") NPT 3/8"
$ 29.04
- Description
- Size Guide
Description
!!Product Descriptions
TC Series coolant pump is single stage and developed for spraying of cooling lubricants and the circulation system, especially for machine tools.
It is suitable to driver liquids such as water, coolant, light oil and other clean, non-aggressive matters liquid to cooling or lubricant applications.
TC Series can be used in machine tools to perform Turning, Milling, Drilling, Cutting, Slitting, Grinding etc. operation
Product Features
- Professional design to perform solid entire unit and high stability
- Whole models with efficient filterable strainer
- Well design to dissipate operation thermal
- Product and design with utility patents
- CE & IP54
- Patented design to avoid liquid over flooding
Product Spec
- Brand: YU HSENG
- Model: TC-8100
- Power: 95
W (1/8 HP )
- Phase & Voltage (Low/High Volt) : Three 3Φ-575 V
(Technician default wiring in High Volt)
- Discharge Bore: NPT 3/8"
- Length (flange to bottom): 100mm (4").
- Flow rate in 60 Hz:
1Φ, 3/8" : 9.2 GPM (35 L/min );
3Φ, 3/8" : 9.8 GPM (37 L/min );
1Φ, 1/2" : 10.6 GPM (40 L/min );
3Φ, 1/2" : 11 GPM (42 L/min );
- Lift (Head Height) in 60 Hz :
1Φ, 3/8" : 5.4 M;
3Φ, 3/8" : 6.0 M;
1Φ, 1/2" : 5.2 M;
3Φ, 1/2" : 5.7 M;
- Pressure in 60 Hz :
1Φ, 3/8" : 7.7 PSI;
3Φ, 3/8" : 8.5 PSI;
1Φ, 1/2" : 7.4 PSI;
3Φ, 1/2" : 8.1 PSI;
- Made in Taiwan ( Factory Location)
< Purchase & Shipping From Our Family Owned Manufacturers Directly>
